Custom LitePad® RGB

Rosco’s Custom LitePad RGB is a color changing, edge-lit, flat panel LED light source providing even, indirect lighting. At only 8mm thick, Custom LitePad RGB is perfectly suited to virtually any backlighting installation or to projects where only a cool, low profile light source can be used. Comprised of indirect LED sources machined into a cast acrylic panel (a patented system), Custom LitePad RGB is both durable and reliable, and can be fabricated in virtually any size or shape.

Custom LitePad RGB includes all the same features of Rosco's standard LitePad product but uses high quality color mixing RGB chips. Three channels of control are used to dial in the precise color desired. Rosco project consultants are available to assist in specifying the optimal configuration of panels and accessories for your project.

LED Type: .25 Watt Surface Mounted Diode

Construction: Optical Grade Clear Acrylic

Panel Thickness: 0.31 in (8 mm)

Weight: 2 lbs (900g)/ft2

Operational Temp.: -22˚F min to 104˚F max

(-30˚C min to 40˚C max)

Estimated Lifespan: 50,000+ hours

Operating Voltage: 12 Volt DC

UL Listed: File E350056

Warranty: 5 Years (3 years for models sold in EMEA)

Electrical Properties

Power Consumption: 5W per ft

Coordination: Panels may be wired together in parallel, not series. Each panel must have direct connection to a power supply.

Wire Placement: The point of wire entry is customizable to accommodate your project’s tiling requirements. Please consult with your project specialist.

Dimming/Control: Rosco can provide a full suite of dimming and control accessories to complement your Custom LitePad.

Cord Length: Custom LitePad comes with a 4 ft (1.2 m) 4 core cable, 3 connections represent each of the single color LED’s for mixing and the fourth is a common ground.

Physical Properties

Single Panel Size: Max: 47” W x 118” L (1.2 m x 3 m)

Min: 6” W x 6” L (152 mm x 152 mm)

Shaping: Custom LitePads can be factory cut into just about any shape imaginable. Also, they can be drilled or tooled anywhere across the interior surface within 1 inch of its edge.

Heat Control: An integral aluminum heat sink is mounted on the rear of the panel to disperse heat build-up, reducing the need for external cooling and prolonging service life.

Thin Film Reflector: Custom LitePads include a reflective, opaque white backing to maximize optical brightness and distribution of light.

IP Rating: IP61

IP65 available on request

Acrylic Properties

Flammability Classification: 94HB

Smoke Density: (D2843) 4-10%

Deflection: Custom LitePad may bow if the panel area is too large. Broad sheets should be supported every 18 inches in any direction.

Optical Properties

LED Positioning Options: LEDs can be positioned around any number of sides or the entire circumference.

Custom LitePad RGB Data Sheet

Custom LitePad RGB Specification Language

Rosco LitePad RoHS Declaration of Compliance

Rosco LitePad CE Declaration of Conformity

Architectural Gallery

Dramatic Architectural Lighting Solutions Brochure

Case Study: Rosco Custom LitePads® Bring “Spineless Wonders” To Life At Bishop Museum

Case Study: The Bright Red Heart of Almere’s City Mall

Video: Rosco LitePad RGB Signals the Arrival of the Bus

Custom LitePad Handling & Mounting Instructions

DPS240/12V Dimmable Power Supply Data Sheet

Rosco 0-10V Dimmable LED Driver Datasheet

Class 2 LED Power Supply Data Sheet

OT DIM Data Sheet

LitePad RGB IES - All Colors On

LitePad RGB IES - Blue Only

LitePad RGB IES - Green Only

LitePad RGB IES - Red Only

Custom LitePad Warranty

Case Study: Custom LitePads® Provide A Magical Glowing Stairway For An Upscale Penthouse