Products on this page may not be available in your region.
The RoscoLED Tape Static White Gaffer Kits provide quick and versatile solutions for the most challenging lighting situations. Combining color-correct strips of durable LED tape with simple plug-and-play connections offers filmmakers fast, easy set-up that minimizes the downtime between takes. The kit is available in Tungsten (3000K) or Daylight (5600K) configurations and contains multiple, short strips of High CRI (>90) LEDs that have a protective silicone coating for repeated use indoors or outdoors. Operating on 12VDC, the RoscoLED Tape found in this kit works seamlessly with our LitePad product-range to offer a broad range of illumination options.
Every 12V strip of RoscoLED Tape generates a high output of white light with 93 CRI and 92 TLCI. This allows RoscoLED Tape products to be mixed with other non-LED light sources for seamless integration on set– without additional filtration or modification of the LEDs.
RoscoLED Tape - 12V Strips come pre-configured with 2.1mm DC barrel connectors that are designed to quickly plug into our range of 12V power and dimming accessories. This is the same connector found on Rosco’s popular line of LitePad™ LED lighting fixtures – enabling filmmakers to easily integrate RoscoLED Tape and LitePad products into their set ups.
RoscoLED Tape 12V Strips feature a robust, 3 oz. copper heat sink. The integrated copper enables efficient thermal management of the LED emitters, allowing them to run cooler and extend their lifespan. The thicker copper base also minimizes potential for damage to the electronic circuits during handling and installation. RoscoLED Tape 12V Strips also feature a silicone coating, which not only provides greater durability, but also an IP67 rating that enables the strips to be used both indoors and outdoors.
What's In The Kit:
(2) 3" Strips of RoscoLED Static White LED Tape with silicone coating & 2.1mm barrel connectors
(2) 6" Strips of RoscoLED Static White LED Tape with silicone coating & 2.1mm barrel connectors
(2) 12" Strips of RoscoLED Static White LED Tape with silicone coating & 2.1mm barrel connectors
(2) 24" Strips of RoscoLED Static White LED Tape with silicone coating & 2.1mm barrel connectors
(2) 10' extension cables
(1) 4-Way Splitter Cable
(1) 3A Power Supply (100-240VAC-In/12VDC-Out)
(1) AA Battery Holder
(1) Car Adapter
(1) Single Fader Dimmer
(1) RF PWM Remote Control
(1) Sentinel 912 Carrying Case
Kit Specifications:
Package Dimensions: 14" L x 12" W x 5.4" H (35.6cm L x 30.5cm W X 13.7cm H)
Weight: 8 lb (3.6 kg)
RoscoLED Tape Strips & Tiles Specifications:
LED Configuration: 3 emitters/inch
Heat Sink: 3 oz. Copper
Lumen Output: 38 lm/in. (1500 lm/m)
Color Temperatures
Tungsten: 3000K
Daylight: 5600K
CRI : 93
TLCI: 92
Voltage: 12VDC
Power Consumption:
IP Rating: IP67 for use indoors or outdoors
Warranty: 1 year
Part Numbers:
293220003000 RoscoLED® Tape Tungsten Gaffer Kit
293220005600 RoscoLED® Tape Daylight Gaffer Kit
Case Study: RoscoLED Tape for News Desks
Please complete this form
|
This compact thumb dimmer provides smooth, flicker-free dimming of any LitePad – with no color temperature change. The dimmer includes a digital display with on/off Thumb Wheel w/push-button toggle and magnets that attach the dimmer to metal C-Stands. |
|
Max. Load: 5 Amps (50 watts) Input: 12VDC/Output: 12VDC Control: Thumb Wheel |
|
This wall-mountable dimmer provides smooth, flicker-free dimming of any LitePad – with no color temperature change. The dimmer features a digital display and two manual, rotary thumb wheels with on/off, push-button toggle to control two LitePads, or two groups of LitePads. The unit also has 5-Pin DMX In & Out, which allows it to interface with a control console via two channels of DMX. |
|
Max. Load: 5 Amps (60 watts) Input: 12VDC/Output: 12VDC Control: Two Manual Rotary Thumb Wheels or Two Channels of DMX DMX 512 via 5-pin XLR |
The LitePad D-Tap Power Adapter will enable the LitePad to plug directly into any power supply with a D-Tap connector, such as Anton/Bauer and V-Mount batteries.
Load: 12VDC 5A Max.
Connectors: Female 2.1mm x 5.5mm Barrel to Male Anton/Bauer
|
The 4-Pin Adapter will enable the LitePad to plug directly into any power supply with a 4-Pin (12VDC) XLR connector. |
|
Load: 12VDC 5 Amp Max. Connectors: Female 2.1mm x 5.5mm Barrel to Male 4-Pin XLR |
|
The Car Adapter plugs directly into any car cigarette lighter to provide 12v DC power for any standard LitePad. |
|
Input: 12VDC Output: 12VDC 3 Amp |
|
The 10ft Extension Cable enables the LitePad to be placed farther away from the transformer. |
|
Load: 12VDC 5 Amp Max. Length: 10 feet (3 meters) |
|
The Y Splitter allows for more than one LitePad to be plugged into a power supply. Be sure the maximum amperage of the power supply is not exceeded when combining LitePads. |
|
Load: 12VDC 5 Amp Max. Length: 12 Inches Connectors: 2.1mm x 5.5mm DC Barrel Connections: Two |
|
The 4-Way Splitter allows for up to four LitePads to be plugged into one power supply. Be sure the maximum amperage of the power supply is not exceeded when combining LitePads. |
|
12VDC 5 Amp Max. Length: 12 Inches Connectors: 2.1mm x 5.5mm DC Barrel Connections: Four |
|
This 1 Amp Transformer is designed to provide 12v DC power for most of the smaller LitePads. It has a one amp maximum, which limits its usage to LitePads that draw less than one amp, including the 3" Circle HO90, and the 3"x3", 3"x6" and 6"x6" sizes of LitePad HO90, Axiom and Axiom 90. |
|
Input: 100-240VAC Output: 12VDC 1 Amp |
|
This 3 Amp Transformer is designed to provide 12v DC power to any standard LitePad. Thanks to the low power consumption of Rosco LitePads, a number of fixtures can be ganged together onto one power supply using LitePad Y-Splitter and 4-Way Cable Splitters – as long as the maximum power consumption of the combined LitePads remains below three amps. |
|
Input: 100-240VAC Output: 12VDC 3 Amp |
|
This 5 Amp Transformer is designed to provide 12v DC power to any standard LitePad. Thanks to the low power consumption of Rosco LitePads, a number of fixtures can be ganged together onto one power supply using LitePad Y Splitter and 4-Way Cable Splitters – as long as the maximum power consumption of the combined LitePads remains below five amps. |
|
Input: 100-240VAC Output: 12VDC 5 Amp |
|
The LitePad AA Battery Holder is designed to provide 12v DC power to any standard LitePad. Thanks to the low power consumption of Rosco LitePads, eight AA batteries can power most fixtures for over an hour or more. Batteries not included. |
|
Input: 8 AA Batteries Output: 12VDC 2 Amp |
Your request is important to us.
We will respond as soon as possible during regular business hours.
Need help right away? Check out our frequently asked questions page here: FAQs
