RoscoGrip™ Strips

Vue d’ensemble
Caractéristiques et spécifications
Produits dérivés

RoscoGrip^™ Strips

Stick It On To Dim It Down

Ressources

Où acheter

Whether it’s headlights, emergency vehicle lights, or LED signage – Rosco Grip Strips are the easiest way to reduce the light output of non-dimmable light sources.

Featuring a medium-tack, repositionable adhesive, RoscoGrip Strips are N.6 neutral density filters that can quickly adhere to virtually any flat lighting surface, and then remove easily.

Caractéristiques
Ressources

Roll Dimensions:	6" x 25' (15.42cm x 7.62m) on a 3” (7.62cm) core
Weight:	13 oz. (365 g)
Material Thickness:	3 mil (82 µm) – without release liner
Transmission:	24.4% - 2 stop loss
Adhesive:	Medium-tack - repositionable
Application Temp:	23° - 77° F (5°-25° C)
Operational Temp:	-22° - 212° F (-30° - 100° C)

Disclaimer: While the RoscoGrip adhesive should be safe to use on most surfaces and finishes, it is up to the end user to test the product beforehand to make sure the adhesive does not negatively affect the surface it’s being adhered to.

Product Number

106002100625 – RoscoGrip Strip – ND.6 – 6”x25’ (15.24cm x 7.62m) Roll