LED Type: .25 Watt Surface Mounted Diode 90+ CRI

Construction: Optical Grade Clear Acrylic

Panel Thickness: 0.3 in (8 mm)

Weight: 2 lbs (900g)/ft2

Operational Temp.: -22˚F min to 104˚F max

(-30˚C min to 40˚C max)

Estimated Lifespan: 50,000+ hours

Operating Voltage: 12 Volt DC or 24 Volt DC

CRI: 95+

UL Listed: File E350056

Warranty: 5 Years

Electrical Properties

Power Consumption: 4.4W per ft.

Coordination: Panels may be wired together in parallel, not series. Each panel must have direct connection to a power supply.

Power Supply: Rosco has a complete range of approved power supplies to meet your project requirements.

Dimming/Control: Rosco can provide a full suite of dimming and control accessories to complement your Custom LitePad.

Wire Placement: The point of wire entry is customizable to accommodate your

project’s tiling requirements. Please consult with your project specialist.

Cord Length: Custom LitePad comes with a 4 ft (1.2 m) two core cable. Cord length and termination is customizable based on the requirements of your project.

Physical Properties

Single Panel Size: Max: 59” W x 118” L (1.5 m x 3 m)

Min: 2” W x 2” L (50 mm x 50 mm)

Shaping: Custom LitePads can be factory cut into just about any shape imaginable. Also, they can be drilled or tooled anywhere across the interior surface within 1 inch of its edge.

Heat Control: An integral aluminum heat sink is mounted on the rear of the panel to disperse heat build-up, reducing the need for external cooling and prolonging service life.

Thin Film Reflector: Custom LitePads include a reflective, opaque white backing to maximize optical brightness and distribution of light.

IP Rating: IP61

IP65 available on request

Acrylic Properties

Flammability Classification: 94HB

Smoke Density: (D2843) 4-10%

Deflection: Custom LitePad may bow if the panel area is too large. Broad sheets should be supported every 18 inches in any direction.

Optical Properties

LED Positioning Options: LEDs can be positioned around any number of sides or the entire circumference.

Color Temperature Options: 2700K, 3000K, 3500K, 4100K, 5300K, 6500K